1505A Rubber Slave Ball Gag Trainer
Sale Ends in
Rubber Slave Ball Gag Trainer Our most popular gag trainer, made in rubber. Two straps over the head hold a 1 3/4" coated ball in place, and the nose rivets run beside the nose instead of over the eyes. Fits...
Guaranteed safe & secure checkout
Rubber Slave Ball Gag Trainer
Our most popular gag trainer, made in rubber. Two straps over the head hold a 1 3/4" coated ball in place, and the nose rivets run beside the nose instead of over the eyes. Fits up to 23".
Why You'll Love It
- Two overhead straps: A single-strap gag can shift. This trainer stays seated.
- 1 3/4" coated ball: Silicone rubber ball with a chip-resistant coating.
- Nose-side rivets: Straps follow the sides of the nose. No ring digging into the bridge.
- Eyes stay clear: Built so long lashes and an un-blindfolded face still work.
- Lock the buckle hole: Padlock through the hole just after the buckle. Padlocks are not included.
- Rated 2.75: Easy to wear. Not coming off until you unbuckle it.
Measurements
- Ball Diameter: 1 3/4"
- Strap Fit: Up to 23" around the head
- Style: Trainer harness with two overhead straps
- Ball: Chip-resistant coated silicone rubber
- Material: High quality rubber straps
- Closure: Buckle with padlock hole
This trainer became a favorite for simple reasons. Two straps over the head keep the ball in the mouth when a bound sub moves. The ball is 1 3/4", coated so it does not chip paint into the teeth the way cheaper balls used to. Once every strap is buckled, the tongue does not push this one out.
The rivets sit beside the nose on purpose. There is no ring at the bridge, so you can buckle it down without a piece of hardware grinding into the forehead for the whole scene. First time on, twist the straps at that rivet. Hold the overhead strap, take both nose straps in the other hand, and work them until they clear the eyes. If they meet too low, tighten the top strap and lift toward the forehead. Too high, loosen the top and take it up on the chin strap.
Dom/mes like it because it looks like a trainer and stays on until you undo it. Slide a padlock through the hole in the buckling strap just after the buckle and it stays yours. Padlocks are not included; add them from our bondage padlocks. Shine the rubber with latex-and-rubber-safe silicone lubricant so it matches the rest of a rubber kit.
Creative Ways to Use This:
- All-scene trainer: Two overhead straps for play that lasts longer than a quick buckle.
- No-blindfold nights: Nose-side straps leave the eyes open.
- Lock the strap: Padlock the hole after the buckle and the trainer stays put.
- Shine the rubber: Gloss the straps so they match cuffs and a collar.
- Quiet rubber kit: Same material family as the rest of the rubber bondage gear.
Keep the rest of the look in rubber. Add rubber bondage gear, trainer gags, and rubber and latex gags, plus ball gags, all gags, and locking bondage gear. Shine the straps from lubricants and lotions.
Strictness Rating: 2.75 / 5.0
Common Questions and Answers
Why two straps over the head? One strap can wander. Two keep the ball seated when they move.
Will it sit on the eyes? The rivets run beside the nose. Twist them at that pivot the first time so they stay off the lashes.
Why no ring on the bridge? So you can buckle it tight without a ring pressing into the nose and forehead.
What size is the ball? 1 3/4", coated silicone rubber, chip-resistant.
Does it lock? There is a hole just after the buckle for a padlock. Padlocks are not included.
What size is the harness? Fits up to 23" around the head.
Rubber Slave Ball Gag Trainer, rubber gag trainer, rubber slave trainer gag, two strap trainer gag, overhead strap ball gag, nose rivet gag trainer, no bridge ring gag, 1.75 inch rubber ball gag, 1 3/4 inch ball gag, chip resistant trainer gag, locking rubber trainer gag, rubber bondage gag, rubber and latex gag, trainer gags, black rubber trainer, 23 inch rubber gag, shine rubber gag, silicone rubber ball gag
Picking out the Right Size for That Someone Special
- How To Measure For The Perfect Fit
- US Dress & Lingerie General Sizing Chart
- International Dress Size Conversion Chart
- Stockings & Pantyhose Sizing
- See Shoe & Boot Sizing Charts Too!
See our Sizing Chart here
Kink & BDSM Education Hub
Free guides for beginners and experienced kinksters. Bondage, restraints, power exchange & more — written with care, shared without judgment since 1997.Explore our complete library of BDSM, kink, and relationship education — free, inclusive, and judgment-free since 1997.
Shop Privately NowJoin the VIP ListPrivate Member Training • Adults 18+ • Limited Introductory Enrollment
Your Next Assignment Is Waiting.
Reading can inspire you. Daily practice changes what you can actually do. Join Daily Sissy Training for one focused private assignment at a time—designed to build feminine presentation, confidence, ritual, service, obedience, communication, chosen chastity, and consensual power exchange into a practice you can follow.
Claim My Complimentary Daily Training →Temporary introductory access is complimentary. No payment today. Private inbox delivery. Unsubscribe at any time.
Why shop with us?
Serving You Discreetly Since 1997
Rubber Slave Ball Gag Trainer
Our most popular gag trainer, made in rubber. Two straps over the head hold a 1 3/4" coated ball in place, and the nose rivets run beside the nose instead of over the eyes. Fits up to 23".
Why You'll Love It
- Two overhead straps: A single-strap gag can shift. This trainer stays seated.
- 1 3/4" coated ball: Silicone rubber ball with a chip-resistant coating.
- Nose-side rivets: Straps follow the sides of the nose. No ring digging into the bridge.
- Eyes stay clear: Built so long lashes and an un-blindfolded face still work.
- Lock the buckle hole: Padlock through the hole just after the buckle. Padlocks are not included.
- Rated 2.75: Easy to wear. Not coming off until you unbuckle it.
Measurements
- Ball Diameter: 1 3/4"
- Strap Fit: Up to 23" around the head
- Style: Trainer harness with two overhead straps
- Ball: Chip-resistant coated silicone rubber
- Material: High quality rubber straps
- Closure: Buckle with padlock hole
This trainer became a favorite for simple reasons. Two straps over the head keep the ball in the mouth when a bound sub moves. The ball is 1 3/4", coated so it does not chip paint into the teeth the way cheaper balls used to. Once every strap is buckled, the tongue does not push this one out.
The rivets sit beside the nose on purpose. There is no ring at the bridge, so you can buckle it down without a piece of hardware grinding into the forehead for the whole scene. First time on, twist the straps at that rivet. Hold the overhead strap, take both nose straps in the other hand, and work them until they clear the eyes. If they meet too low, tighten the top strap and lift toward the forehead. Too high, loosen the top and take it up on the chin strap.
Dom/mes like it because it looks like a trainer and stays on until you undo it. Slide a padlock through the hole in the buckling strap just after the buckle and it stays yours. Padlocks are not included; add them from our bondage padlocks. Shine the rubber with latex-and-rubber-safe silicone lubricant so it matches the rest of a rubber kit.
Creative Ways to Use This:
- All-scene trainer: Two overhead straps for play that lasts longer than a quick buckle.
- No-blindfold nights: Nose-side straps leave the eyes open.
- Lock the strap: Padlock the hole after the buckle and the trainer stays put.
- Shine the rubber: Gloss the straps so they match cuffs and a collar.
- Quiet rubber kit: Same material family as the rest of the rubber bondage gear.
Keep the rest of the look in rubber. Add rubber bondage gear, trainer gags, and rubber and latex gags, plus ball gags, all gags, and locking bondage gear. Shine the straps from lubricants and lotions.
Strictness Rating: 2.75 / 5.0
Common Questions and Answers
Why two straps over the head? One strap can wander. Two keep the ball seated when they move.
Will it sit on the eyes? The rivets run beside the nose. Twist them at that pivot the first time so they stay off the lashes.
Why no ring on the bridge? So you can buckle it tight without a ring pressing into the nose and forehead.
What size is the ball? 1 3/4", coated silicone rubber, chip-resistant.
Does it lock? There is a hole just after the buckle for a padlock. Padlocks are not included.
What size is the harness? Fits up to 23" around the head.
Rubber Slave Ball Gag Trainer, rubber gag trainer, rubber slave trainer gag, two strap trainer gag, overhead strap ball gag, nose rivet gag trainer, no bridge ring gag, 1.75 inch rubber ball gag, 1 3/4 inch ball gag, chip resistant trainer gag, locking rubber trainer gag, rubber bondage gag, rubber and latex gag, trainer gags, black rubber trainer, 23 inch rubber gag, shine rubber gag, silicone rubber ball gag
Picking out the Right Size for That Someone Special
- How To Measure For The Perfect Fit
- US Dress & Lingerie General Sizing Chart
- International Dress Size Conversion Chart
- Stockings & Pantyhose Sizing
- See Shoe & Boot Sizing Charts Too!
See our Sizing Chart here
Kink & BDSM Education Hub
Free guides for beginners and experienced kinksters. Bondage, restraints, power exchange & more — written with care, shared without judgment since 1997.Explore our complete library of BDSM, kink, and relationship education — free, inclusive, and judgment-free since 1997.
Shop Privately NowJoin the VIP ListPrivate Member Training • Adults 18+ • Limited Introductory Enrollment
Your Next Assignment Is Waiting.
Reading can inspire you. Daily practice changes what you can actually do. Join Daily Sissy Training for one focused private assignment at a time—designed to build feminine presentation, confidence, ritual, service, obedience, communication, chosen chastity, and consensual power exchange into a practice you can follow.
Claim My Complimentary Daily Training →Temporary introductory access is complimentary. No payment today. Private inbox delivery. Unsubscribe at any time.